We don't know that in the development of fasteners, a kind of fastener at the connection of soft and hard pipes is often involved. This fastener is the so-called throat hoop. In our existing technology, throat hoop is used for the connection of small diameter soft and hard pipes, which is prone to dead angle. After understanding its basic characteristics, let's take a look at the connection process of stainless steel throat hoop with Huayuan Xiaobian. I believe you will be interested in it.

The utility model solves the problem of dead angle and liquid and gas leakage when the throat hoop is used for connecting small diameter soft and hard pipes in the prior art. The throat hoop adopts an open inner and outer ring structure and is fastened with bolts. The throat hoop effectively solves the problems of dead angle and liquid and gas leakage when small diameter soft and hard pipes are connected. The structure is simple and easy to make, and the cost is 30% of the original product. The throat hoop is widely used in motor vehicles, petrochemical, pharmaceutical, food, wine making, sewage treatment, purification, dust removal, automobile accessories and other machine accessories.

Features of throat hoop: low worm friction, especially suitable for the connection of vehicle type or anti-corrosion material parts. The throat hoop has a wide range of application, anti torsion and pressure resistance, even torsion torque, firm locking, very tight, and wide range of adjustment. The throat hoop is suitable for fasteners connecting soft and hard pipes over 30mm. The appearance of the assembled throat hoop is particularly beautiful.

For the connection process of stainless steel throat hoop, the steel pipe shall be cut according to the required length by the steel pipe cutting machine, the cut shall be flat, and the end face of the cut shall be perpendicular to the axis of the steel pipe. If there is burr at the incision, it should be polished with sandpaper, file or grinder. It is suggested to use the pipe cutter of the threading machine to break the pipe. The advantage is that the end face of the pipe is vertical and flat, and there is little burr. When the conventional toothless saw is used to cut the pipe, it is easy to cause the pipe section dislocation and more burrs due to the factors such as the uneven end face of the saw blade, excessive force, pipe rotation and so on.

The above is a small series to introduce to you about the stainless steel hoop connection process related content, you should have a lot of impression on it, if you usually encounter in life or work about stainless steel hoop problems, please contact us in time, we will be dedicated to solve any problems about it.